Environmentally Friendly Button Cell Batteries (SR/LR) Notes

Safety Instructions

Improper handling of batteries may cause deformation, leakage*, overheating or explosion, resulting in personal injury or equipment failure.

In particular, contact with liquid leaking from batteries may cause blindness. Be sure to follow the instructions below to prevent accidents.

Warning-Handling

Do not swallow by young children.

Do not place batteries within the reach of infants and young children to prevent them from swallowing batteries by mistake. If swallowing occurs, consult a physician immediately.

Do not allow leaked liquid from batteries to contact the human body.

Batteries contain strong alkaline liquid, which is harmful to the human body. If liquid accidentally enters the eyes, rinse immediately with plenty of water and consult a physician, as alkaline liquid can cause blindness. Similarly, if liquid enters the mouth, rinse the mouth immediately with plenty of water and consult a physician. Alkaline liquid may also irritate the skin and/or cause chemical burns. If the liquid gets on the skin or clothes, rinse immediately with plenty of water.

Do not short-circuit the battery.

Short circuits between the positive and negative terminals of the battery should be avoided. Do not carry or store batteries together with metal devices (such as necklaces or hairpins, etc.). Do not remove multiple batteries from the packaging and stack or store them together. Otherwise, the battery may deform, leak, overheat, or explode.

Charging is strictly prohibited. This battery is a non-rechargeable battery and cannot be charged with any other power source. Charging may cause gas and internal short circuits, causing deformation, leakage, overheating, or explosion.

Exposure to open flames is strictly prohibited.

Exposure to open flames may cause the battery to explode.

Heating is strictly prohibited.

Heating the battery to 100°C may cause the internal pressure to increase, causing deformation, leakage, overheating, or explosion.

Disassembling or deforming the battery is strictly prohibited.

Disassembling or deforming the battery may cause internal short circuits, causing leakage, overheating, or explosion.

Exposing the battery to high temperatures (for example, in direct sunlight or in a car on a hot day) is strictly prohibited. Placing in these places may cause the battery to deform, leak, overheat or explode.

It is strictly forbidden to store the battery in a high temperature or high humidity environment.

Placing in these places may cause the battery performance to deteriorate. In some cases, it may also cause the battery to deform, leak, overheat or explode.

It is strictly forbidden to let the battery get wet.

Water may cause the battery to rust or cause deformation, leakage, overheat or explosion.

Note-Operation/Storage

Battery storage environment: temperature 10~25℃, relative humidity 40~70%

It is strictly forbidden to reverse the positive and negative poles during installation.

Improper battery installation may cause short circuit, charging or forced discharge, causing deformation, leakage, overheating or explosion.

It is strictly forbidden to short-circuit the battery when installing the battery.

Be careful when installing the battery into the device to prevent the metal part of the device from short-circuiting the battery.

It is strictly forbidden to directly weld the terminals or wires to the battery.

Welding or welding may cause the battery to deform, leak, overheat or explode.

Do not mix different batteries.

Due to the different properties of different batteries (models, new and old or brands), mixing them may cause deformation, leakage, overheating or explosion.

Batteries should be removed from the device after use.

Leaving batteries in the device for a long time may cause gas generation, causing deformation, leakage, overheating or explosion and damage to the device.

Batteries should be removed from the device when not used for a long time.

Batteries may generate gas, causing leakage and damage to the device.

Do not subject batteries to strong vibrations.

Dropping, throwing or stepping on batteries may cause deformation, leakage, overheating or explosion.

Choose the right type of battery for the device.

Due to differences in the models and usage conditions of each device, this battery may not be suitable for a specific device. Please select the right battery according to the operating instructions of the device.

Note - Disposal

National or regional regulations may have requirements for this battery. Please comply with the relevant regulations and standards. Because there is still residual power in the discarded battery, if it comes into contact with other metals, it may cause the battery to deform, leak, overheat or explode. Therefore, before discarding, you should first cover the positive (+) and negative (-) poles of the battery with insulating tape or other insulating materials

Overview

The CNB brand was founded by China (Hong Kong) Canon Battery Co., Ltd. Canon Battery is a company with more than 40 years of experience in producing alkaline button batteries and silver oxide batteries. CNB is the crystallization of Canon Battery's long-term market accumulation and rich R&D experience. The SR silver oxide battery series can meet the requirements of high energy density and specific voltage per unit volume for precision electronic instruments such as quartz watches. The LR alkaline series can meet the requirements of products such as luminous and sounding bodies that require greater kinetic energy. SR and LR series batteries provide different product series for users to choose from, which can provide power for watches, precision instruments, luminous, sounding and other toys of various sizes, thicknesses and styles.

For more information, please contact: +86-13928850138